What you need to know about shotguns is very similar to what you need to know about pompguns. In general, shotguns are produced in many different styles. The most common types are pump and semi-automatic long-guns. We know, you have been asking; ‘How to load a shotgun properly? Here we’ve produced some easy methods for loading.
How To Load A Shotgun? Here Is The Answer!
The only difference between shotgun models is that different gun manufacturers place the safety and bolt release buttons in different places. To say the least, one gun manufacturer may place the safety button at the top, while others may choose to place the safety near the trigger guard.
There are two ways to load any kind of tube-fed shotgun. The first way is keeping the chamber empty until you are ready to shoot. The second way involves loading the chamber and the magazine tube. For those asking ‘How to load a shotgun?’ We hope that we have supplied a clear and understandable answer to the question.
First Way
If you want to load the shotgun and you want the chamber to be empty you can start by following these steps;
First, you need to make sure that the safety is engaged and that the gun is pointed in a safe direction. Undoubtedly, this is one of the most important considerations.
Now, slowly and carefully pull back the bolt handle while making sure that the chamber is empty.
You need to close the action by depressing the bolt release button so carefully.
You can now load the shells into the magazine tube. Just press the lifter and the bullet stopper, which holds the bullets in your magazine tube
If you’re ready to fire, once you reach your blind spot or stand you will pull back the bolt hand to load a bullet into the chamber. Then if you want you can then add a round to the magazine tube easily.
If you’re using stock magazine tubes with limiter plugs, usually the only way to load 3 rounds into the gun is one in the chamber, two in the tube.
But if you don’t know much about rifle firing, the most important thing to know is that if you pull the gun out carefully and pull the trigger, when the shotgun chamber is empty, it will probably pass the bullet stop and cause a bullet to drop into the lifter.
This can be extremely annoying sometimes. That’s why this technique is not preferred by many gun lovers. So it would be very wise not to use this as a technique. If you are shooting without using the technique we don’t recommend, when you pull the trigger and nothing happens except a shell dropping onto the lifter, at least you will know you never put a round in the chamber. Clear as a day!
The Second Way
If you want to look cool while loading your rifle or if you want to be ready to shoot in the chamber check this out;
First, you need to make sure that the safety is engaged and that the gun is pointed in a safe direction. Undoubtedly, this is one of the most important considerations.
Now, slowly and carefully pull back the bolt handle while making sure that the chamber is empty.
Now, drop a shell into the open action and be careful. Next continue with hitting the bolt release button to close the action. Next, it’s time to load the round into the chamber.
The last step is to load shells into the magazine tube and you are ready to shoot.
Loading a Pump-Action Shotgun
Actually, pumps are less likely to suffer problems than semi and auto shotguns do. All you need to do is to make sure the safety is on, the chamber unloaded. You need to determine what caliber your rifle is so that you can select the appropriate rounds. The most commonly used shotgun sizes are 10, 12, 16, 20, .410 and 28.
In a sitting position, place the butt of the pump on your left thigh. You can place a shell against the loading flap just ahead of the trigger guard. Continue until the magazine tube is full.
Hold in the action release button then pump the slide backwards and then forwards carefully to load the chamber.
Get more information: https://armoryfarm.com/